LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Amanti >> Repair and Diagnosis >> Brakes >> Traction Control >> Esp (Electronic Stability Program) >> Steering Angle Sensor >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Remove the bolt cover from both down side the steering wheel cover.
  2. Loosen two bolts using the hex wrench.
    Fig 1: Locating Steering Wheel Cover And Bolt
    G06406823Courtesy of KIA MOTORS AMERICA, INC.
  3. Using the special tool (09561-1101), remove the steering wheel.
    CAUTION: Do not hammer on the steering wheel to remove it; doing so may damage the collapsible shaft.
    Fig 2: Locating Steering Wheel
    G06406824Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the steering column lower shroud and upper shroud.
  5. Remove the lower cover.
    Fig 3: Locating Steering Column Lower Shroud And Upper Shroud
    G06406825Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the steering wheel angle sensor after loosening the clock spring mounting bolt.
    Fig 4: Locating Clock Spring Mounting Bolt
    G06406826Courtesy of KIA MOTORS AMERICA, INC.