Control Circuit Inspection

Check for short to battery in harness
1. Ignition "OFF"
2. Disconnect CCV connector
3. Measure resistance between terminal "2" and "1" of CCV harness connector.
  Specification : Infinite
  
  Fig 1: Measuring Resistance Between Terminal "2" And "1" Of CCV Harness Connector
  Courtesy of KIA MOTORS AMERICA, INC.
4. Is the measured resistance within specifications?
  YES
  - Go to "COMPONENT INSPECTION " procedure.
  NO
  - Check short to battery in harness.
  - Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.