PODS Re-zero procedure

You should perform PODS Re-zero procedure after service or replacement about all part of the passenger seat.

1. Ignition "OFF", connect scantool.
2. Ignition "ON" & Engine "OFF", select Airbag system and "PODS Reset" mode.
   Fig 1: Performing PODS Re-Zero Procedure Using Scantool (1 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.
   Fig 2: Performing PODS Re-Zero Procedure Using Scantool (2 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.
3. The scantool will show the two PODS RESET function steps.
   1. Erase PODS ECU diagnostic codes.
   2. PODS ECU initialization.
      Fig 3: Performing PODS Re-Zero Procedure Using Scantool (3 Of 11)

      Courtesy of KIA MOTORS AMERICA, INC.
      CAUTION: This step must be done PODS re-zero, when the front passenger seat is empty.
4. Press the OK button to erase the PODS related diagnostic codes.
   Fig 4: Performing PODS Re-Zero Procedure Using Scantool (4 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.
5. Press OK button to initialize the PODS.
   Fig 5: Performing PODS Re-Zero Procedure Using Scantool (5 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.
   CAUTION: This step must be done PODS re-zero, when the front passenger seat is empty.
6. The PODS initialization procedure will be performed.
   Fig 6: Performing PODS Re-Zero Procedure Using Scantool (6 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.
7. Check PODS situation with selecting "Pass. Airbag Realtime Info" after performing PODS Reset procedure.
   Fig 7: Performing PODS Re-Zero Procedure Using Scantool (7 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.
8. Perform inspection with pressing OK button.
   Fig 8: Performing PODS Re-Zero Procedure Using Scantool (8 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.
9. Finish the procedure with pressing cancel button if there is no problem after inspecting each status as below.
   Fig 9: Performing PODS Re-Zero Procedure Using Scantool (9 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.
   Fig 10: Performing PODS Re-Zero Procedure Using Scantool (10 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.
   Fig 11: Performing PODS Re-Zero Procedure Using Scantool (11 Of 11)

   Courtesy of KIA MOTORS AMERICA, INC.