LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> Body Network System >> Functions >> Exterior Lighting Functions >> Battery Saver Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Battery Saver Function

  1. Necessary conditions to activate the Battery Saver function:
    1. Do not turn off the Park/Tail Lamp when intentionally turned on.
    2. If Key reminder switch is ON and Park/Tail Lamp switch is ON, Intentional "ON" should be reset
    3. If the driver's door is open and if the key is not in the key hole whereas the headlamp switch is still in position `Park and tail lamp' or `headlamp Low Beam', the park and tail lamps (and the Front fog lamps if turned on) are immediately turned off.
  2. Necessary conditions to cancel the Battery Saver function:
    • As soon as the Key is input into the IGN Key Cylinder or the headlamp switch is put to position OFF.
    Fig 1: Flashing Pattern Of Battery Saver
    G04884596Courtesy of KIA MOTORS AMERICA, INC.
  3. Functional diagram
    Fig 2: Battery Saver Functional Diagram
    G04884597Courtesy of KIA MOTORS AMERICA, INC.