Monitor SCANTOOL Data

Check status

1. Ignition "ON" & engine "OFF"
2. Monitor the "ECU, KEY and Smartra STATUS" Parameter on the scan tool.

   Specification: `LEARNT'

   Fig 1: View Of Current Data Display

   Courtesy of KIA MOTORS AMERICA, INC.

   Fig. 1) This data show that 3 keys have been taught, ECU has been learned, Key in key cylinder has been learned and SMARTRA3 has been learned.

3. Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter within specifications?

   YES 

   Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage on the ECM or SMARTRA.

   And This DTC has not been erased in previous repair. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

   NO 

   Go to COMPONENT INSPECTION procedure.