Variant Coding

1. Check for improper installation of EMS/PCM (ECM & TCM)/ESC.
2. Connect scan tool to Data Link Connector (DLC).
3. Ignition "ON".
4. Go in Anti-Lock brake system (Fig 1).
5. Perform variant code checks as per DTC found.
6. Disconnect scan tool.
7. Ignition "OFF" and then ignition "ON". Go to "COMPONENT INSPECTION " Procedure.

* For the vehicle equipped 4WD, delete the DTC(s) memorized in 4WD ECU when variant coding is completed.

Fig 1: Scan Tool Display - Variant Coding

Courtesy of KIA MOTORS AMERICA, INC.