Body Control Module (BCM): Specifications: Specifications
ITEM SPECIFICATION
| Item | Requirements | Note |
|---|---|---|
| Rated Load | DC 12V | Should be operated normally between two ranges. |
| Operating Voltage | DC 9V-16V | |
| Operating Temperature | -22°F to 176°F (-30°C to 80°C) | |
| Storage Temperature | -40°F to 185°F (-40°C to 85°C) | |
| Insulation Resistance | Should have no heating or burning due to the leakage current (100 MΩ) | Measure with 500V (Except for Ground/Earth) |
ITEM SPECIFICATION
| Item | Rated Load |
|---|---|
| Tail lamp relay | DC 12V, 200 mA (Induced Load) |
| Front fog lamp relay | DC 12V, 200 mA (Induced Load) |
| Key hole illumination lamp | DC 12V, 2W (LAMP Load) |
| Room lamp | DC 12V, 10W (LAMP Load) |
| Central door actuator | DC 12V, MAX 25A (ACTUATOR Load): 5 EA |
| 2 Turn unlock actuator | DC 12V, MAX 5A (Actuator Load) |
| Burglar horn | DC 12V, 3.5A (Induced Load) |
| Burglar relay | DC 12V, 200 mA (Induced Load) |
| Seat belt lamp | DC 12V, 1.4W (LAMP Load) |
| RR defogger relay | DC 12V, 200 mA (Induced Load) |
| P/WDW timer relay | DC 12V, 200 mA (Induced Load) |
| INT wiper relay | DC 12V, 200 mA (Induced Load) |
| RR wiper relay | DC 12V, 200 mA (Induced Load) |
| Trunk relay | DC 12V, 200 mA (Induced Load) |
| DRL relay | DC 12V, 200 mA (Induced Load) |
| Flasher lamp | TURN SIGNAL: TURN 27W X 2 + 5W + 1.4W HAZARD: 27W X 2 + 5W + 1.4W |
| Side repeater | DC 12V, 5WX2 (LAMP load) |