LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Spectra5 2.0 2, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (A4CF2) >> Automatic Transaxle Control System >> Output Speed Sensor >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Speed Sensor: Description

OUTPUT SPEED SENSOR DESCRIPTION

Sensor type
  1. Type: HALL SENSOR
  2. Output voltage: DC 12V
  3. Current consumption: 22mA (Max)
Function
  1. Output shaft speed sensor: Detect the output shaft RPM (T/F DRIVE GEAR RPM) at the T/F drive gear
  2. Feedback control, clutch-clutch control, damper clutch control, shift range control, incorrect ratio control and sensor trouble detection signal.
Connector
G04864719Courtesy of KIA MOTORS AMERICA, INC.
Fig 1: Identifying Output Shaft Speed Sensor
G04864716Courtesy of KIA MOTORS AMERICA, INC.
OUTPUT SPEED SENSOR SPECIFICATIONS

Item Inspection item Standard value
Air gap Output shaft speed sensor 0.05 in. (1.3 mm)
Sensor resistance Output shaft speed sensor Over 4MΩ
Output voltage HIGH Over 4.8V
LOW Below 0.8V
scientia non olet · About LEMON Manuals