Transaxle Oil Temperature Sensor: Installation

Connect the oil temperature sensor connector to the valve body.
CAUTION: When connecting the oil temperature connector, check the connector for rust, dirt, or oil, then reconnect It.
Install the valve body.
TORQUE: 10-12 N.m (100-120 kgf.cm, 7-8 lb-ft)

NOTE: 6X30 mm (A): 17EA, 6X35 mm (B): 1EA, 6X40 mm (C): 1EA, 6X55 mm (D): 1EA, 6X60 mm (E): 1EA

Fig 1: Identifying Valve Body Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Install the oil filter.
TORQUE: 5-7 N.m (50-70 kgf.cm, 4-5 lb-ft)
Continue to apply liquid gasket at application points at the oil pan with 0.098 in. (2.5 mm) thickness.
Liquid gasket Part name: Threebond 1281B

Fig 2: Identifying Liquid Gasket Application Points
Courtesy of KIA MOTORS AMERICA, INC.
Tighten the mounting bolt with the specified TORQUE after installing the oil pan.
TORQUE: 10-12 N.m (100-120 kgf.cm, 7-8 lb-ft)
Install the drain plug.
TORQUE: 35-45 N.m (350-450 kgf.cm, 25-32 lb-ft)
Installation is the reverse of the removal.