System Inspection
- Start the engine and raise the engine speed to 2,500~3,000 RPM
- Turn ON all electrical loads by turning on the headlamps, and by turning on the high blower motor, etc
- Monitor the battery (ignition) voltage parameter on the Scantool data list
Specification:
TEMPERATURE/VOLTAGE SPECIFICATIONAmbient temperature °C (°F) Reference Voltage (V) -20 (-4) Approx. 14.2~15.4 20 (68) Approx. 14.0~15.0 60 (140) Approx. 13.7~14.9 80 (176) Approx. 13.5~14.7 - Is the battery voltage within the specification?
YES
- Go to next Inspection procedure
NO
- Possibility of charging system malfunction. Repair or replace alternator and battery. Refer to CHARGING SYSTEM , and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.