LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Forte EX, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle Control System - A5CF2) >> Input Speed Sensor >> Repair procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the new O-ring to the input speed sensor.
  2. Install the input speed sensor (A).

    Tightening torque: 

    10~12Nm (1.0~1.2kgf.m, 7~8lb-ft)

    CAUTION: While installing the input shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
    Fig 1: Identifying Input Speed Sensor
    G06494637Courtesy of KIA MOTORS AMERICA, INC.
  3. Check the connector for dust, dirt, or oil, and then connect the input speed sensor connector (A) securely.
    Fig 2: Identifying Input Speed Sensor Connector
    G06494638Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals