Repair Procedures: Inspection: Notes

MEASURING RESISTANCE 

1. Disconnect the cruise control switch connector from the control switch.
   Fig 1: Identifying Cruise Control Switch Connector Terminals

   Courtesy of KIA MOTORS AMERICA, INC.
2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
   TERMINALS REFERENCE
   
   

   Function switch	Terminal	Resistance
   Cruise Main	RH 1-2	3.9kΩ ± 1%
   Cancel	RH 1-3	0Ω ± 1%
   Set/Coast	RH 1-3	220Ω ± 1%
   Resume/Accel	RH 1-3	910Ω ± 1%

3. If not within specification, replace switch.