General Information: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item	Detecting Condition	Possible Cause
DTC Strategy	Response rate	Poor connection leak or clog in intake air system Injector Fuel pressure B1S2 ECM
Enable Conditions	Time after fuel cut-off > 5 s Integrated air mass after fuel cut-off > 15 g (0.53oz.) Time after dew point end detected > 30 s
Threshold Value	B1S2 sensor voltage > 0.15 V
Diagnostic Time	0.2 sec
MIL ON Condition	2 driving cycle

* B1S1 : upstream oxygen sensor/B1S2 : downstream oxygen sensor