IPM (In-Panel Module)

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel (A).

   Refer to CRASH PAD .

   Fig 1: Crash Pad Lower Panel

   Courtesy of KIA MOTORS AMERICA, INC.
3. Remove the keyless antenna cable and IPM (Instrument Panel Module) (A) after loosening 3 nuts and disconnecting 5 connectors.
   Fig 2: Instrument Panel Module

   Courtesy of KIA MOTORS AMERICA, INC.
4. Installation is the reverse of removal.

FAM (Front Area Module) 

1. Disconnect the negative (-) battery terminal.
2. Remove the FAM cover from the engine room.
3. Remove the 2 FAM connectors (A) and battery terminal nut (B).
   Fig 3: FAM Connectors & Nut

   Courtesy of KIA MOTORS AMERICA, INC.
4. Remove the IPM (B) from the splash shield (C) after loosening the 3 IPM mounting bolts (A) and the IPM mounting clip.
   Fig 4: IPM, Splash Shield & Mounting Bolts

   Courtesy of KIA MOTORS AMERICA, INC.
5. Disconnect the connector from the splash shield.
6. Installation is the reverse of removal.