July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Circuit Inspection

Check for Open in Power Circuit
1. IG KEY OFF.
2. Disconnect VCMA harness connector and PCM harness connector.
3. Measure resistance between both ends of power line.
  Specification : Approx. 0 Ω
  
  Fig 1: Measuring Resistance Between Both Ends Of Power Line
  Courtesy of KIA MOTORS AMERICA, INC.
4. Is resistance within specification?
  YES
  - Go to next procedure.
  NO
  - Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.