Monitor Scantool Data
WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
- Connect scantool to Data Link Connector (DLC).
- Warm up the engine to normal operating temperature.
- Using scantool, check if there is an error in ABS/ESC system.
If there is an error in ABS/ESC system, first do a troubleshooting for those system and then check 4WD system.
- Is the same DTC displayed again?
YES
- Go to next procedure.
NO
- Repair as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.