Repair Procedures: Inspection: Disposal

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.

Fully extend the piston rod.
Drill a hole on the A section to remove gas from the cylinder.

Fig 1: Identifying Hole Drilling Dimension On Piston Rod

Courtesy of KIA MOTORS AMERICA, INC.

CAUTION: The gas coming out is harmless, but be careful of chips that may fly when drilling.

Be sure to wear safety goggles or eye protection when performing this task.