Testing And Repairs

Do not use wires or harnesses with broken insulation.
Replace them or repair them by wrapping the break with electrical tape.
After installing parts, make sure that no wires are pinched under them.
When using electrical test equipment, follow the manufacturer's instructions and those described in this Service Information.
If possible, insert the probe of the tester from the wire side (except waterproof connector).

Fig 1: Inserting Probe Of Tester From Wire Side
Courtesy of KIA MOTORS AMERICA, INC.
Use a probe with a tapered tip.

Fig 2: Probe With Tapered Tip

Courtesy of KIA MOTORS AMERICA, INC.