LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2012 >> Soul ! >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Body Control Module (BCM)) >> Description And Operation >> Function >> Turn And Hazard Control >> Turn Signal Control Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Turn Signal Control Function

WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the Left (or Right) turn switch is active and if IGN2 is On, the left (or Right) turn signal outputs are driven.
  2. The turn signal is active as long as both conditions ((L_TurnSigLHSW or L_TurnSigRHSW = On) and L_IGN2 = On) are true and is turned Off when one of these conditions is no longer detected.
  3. If bulb failure (outage or open load) is detected on the activated turn signal side, the flasher is operated with fault flashing.
  4. This failure can be detected only when IGN1 and IGN2 On (A_IGN1 == On and L_IGN2 == On).
  5. While Turn switch is On and failure was detected, even if bulb failure is no longer detected, keep the fault flashing and after next Turn switch On or IGN On transition, flasher is activated with normal blinking.
Fig 1: Turn Signal Control Function Signal Chart
G07426855Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals