Repair Procedures

Removal

[200W]
1. Disconnect the battery negative terminal.
2. Remove the glove box housing.
3. Disconnect the connector (A) and then remove the DC/DC converter (B).





[400W]
1. Disconnect the battery negative terminal.
2. Remove the rear seat .
3. Remove the luggage side trim RH .
4. Disconnect the connector (A) and then remove the DC/DC converter (B).





NOTE:
After disconnecting then reconnecting the battery negative cable, the ISG function dose not operates until the system is stabilized, about 4 hours.

Installation

1. Installation is reverse of removal.