LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Airbag Modules & CLOCKSPRING) >> Driver Airbag (DAB) Module and Clock Spring >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2011 Hyundai Veracruz. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the airbag module mounting bolts (2EA).
    Fig 1: Locating Airbag Module Mounting Bolts
    G06861636Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the horn connector (A).
    Fig 2: Disconnecting Horn Connector
    G06861637Courtesy of HYUNDAI MOTOR CO.
  4. Release the connector locking pin, then disconnect the driver airbag module connector (B).
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.
  5. Remove the steering wheel and steering wheel column cover. (Refer to STEERING COLUMN & SHAFT )
  6. Disconnect the clock spring and horn connector, then remove the clock spring.
    Fig 3: Identifying Clock Spring & Horn Connector
    G06861638Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals