LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2014 >> Sorento LX, 2.4L Eng VIN 6, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (C), the bolt (B) and then remove the accelerator pedal module.
    Fig 1: Identifying Accelerator Position Sensor Connector And Nuts
    G09764345Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Identifying Accelerator Position Sensor Connector And Bolt
    G09764346Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals