LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2014 >> Sorento LX, 2.4L Eng VIN 6, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Engine Control Module (ECM) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM Connector (A).
    Fig 1: Identifying ECM Connector
    G09764291Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the battery.

    (Refer to "BATTERY ")

  4. Remove the air cleaner assembly.

    (Refer to "AIR CLEANER ")

  5. Remove the mounting bolt (A) and nuts (B), and then remove the ECM (C).
    Fig 2: Identifying ECM Mounting Bolt And Nuts
    G09764292Courtesy of KIA MOTORS AMERICA, INC.
  6. After removing the installation nuts (A) and screws (B), remove the ECM (C) from the bracket.
    Fig 3: Identifying ECM, Nuts And Screws
    G09764293Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals