LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Rio EX, 4D Hatchback >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1/Intake]
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

[Bank 1/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
Fig 1: Identifying Camshaft Position Sensor Connector And Mounting Bolts (Bank 1/Intake)
G08321406Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals