Driver/Passenger Power Window Switch

Disconnect the negative (-) battery terminal.
Remove the front door trim.
(Refer to Body - "FRONT DOOR TRIM ")
Loosen the front door armrest (A) mounting screws.

Fig 1: Front Door Armrest With Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Using a screwdriver or remover, separate the mounting clips and then remove the driver door module panel (A).

Fig 2: Removing Driver Door Module Panel
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the mounting screws and then remove the driver door module(DDM) (A) after separating the mounting clips.

Fig 3: Driver Door Module With Screws
Courtesy of KIA MOTORS AMERICA, INC.

CAUTION: Be careful not to damage the mounting clips.

Fig 4: Checking Driver Door Module Mounting Clips
Courtesy of KIA MOTORS AMERICA, INC.