Power Window Main Switch Inspection

WARNING: This page is about a different car, the 2017 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the front door trim.
(Refer to Body - "FRONT DOOR TRIM ")
Disconnect the connector (A) from the power window switch module.

Fig 1: Locate Power Window Switch Module Connector Terminals
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table.
[Driver/Assist Safety]

Fig 2: Power Window Switch Module Terminal Continuity Chart (Driver/Assist Safety)
Courtesy of KIA MOTORS AMERICA, INC.

[Driver Auto Down]

Fig 3: Power Window Switch Module Terminal Continuity Chart (Driver Auto Down)
Courtesy of KIA MOTORS AMERICA, INC.