LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Tire Pressure Monitoring System) >> TPMS Receiver >> Repair Procedures >> Replacement >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement: Notes

WARNING: This page is about a different car, the 2016 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When the receiver first arrives for replacement:
  1. It will be in Virgin State.
  2. It will not be configured for any specific platform.
  3. It will not have any sensor ID's memorized.
CAUTION: It is important to make sure that the correct receiver is used to replace the faulty part i.e. it must be Low Line and not High Line in order to have the correct inflation warning thresholds set.
  1. Disconnect vehicle battery.
  2. Remove the crash pad garnish.

    (Refer to CRASH PAD "Crash Pad")

  3. Remove the receiver with bracket.
    Fig 1: Remove Receiver With Bracket
    G11935899Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.
  5. Re-connect battery and turn Ignition on.
  6. After replacing the receiver, learn by using self-diagnosis device (GDS).
scientia non olet · About LEMON Manuals