Repair procedures: Installation

1. Install in the reverse order of removal.
   NOTE: Ensure that the side surface of the smart cruise control (SCC) unit is perpendicular to the level ground using the SST 0K964-3T000 (A).
   Fig 1: Checking Side Surface Of Smart Cruise Control (SCC) Unit Related To Ground Using SST (0K964-3T000)

   Courtesy of KIA MOTORS AMERICA, INC.

   Smart cruise control unit installation bolt/nut: 

   7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

2. Perform the smart cruise control radar sensor alignment procedure.

   (Refer to "Smart Cruise Control Sensor Alignment ")

3. Install the front bumper.

(Refer to Body - "FRONT BUMPER ")