Repair Procedures: Installation
WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
- Install in the reverse order of removal.
- Adjust the ignition lock switch.
- In state of full stroke, adjust the gab by rotating the adjust nut (A) to satisfy the standard gap range.
Standard Gap Range:
3 ~ 4 mm (0.1181 ~ 0.1575 in.)
- Tighten the nut (B) with the specified torque.
Tightening Torque:
7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb -ft)
- In state of full stroke, adjust the gab by rotating the adjust nut (A) to satisfy the standard gap range.