Repair Procedures: Inspection
WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
If any of the following conditions occur, WCS reset and accuracy check should be performed.
- The WCS ECU or any of the sensors is replaced.
- The vehicle is brought to the repair shop due to an accident or a crash even though the severity seems to be minor.
- The telltale lamp is not illuminated when the passenger seat is not occupied.
- The telltale lamp is delayed more than 10 seconds to be turned off when an adult passenger seats in.
- The passenger seat is removed from the vehicle and reassembled.
- Any accessories (side table, seatback table and seat cover, etc.) are replaced or installed.
- The passenger seat is interference with the folded rear seat.
If Same problems is continued, WCS must be replaced after WCS Reset and accuracy check.