LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Forte Koup SX, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Supplemental Restraint System Control Module (SRSCM), Weight Classification System (WCS) & Sensors) >> Weight Classification System (WCS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2015 Kia Forte5, 2015 Kia Forte Koup, and 2015 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front passenger seat assembly.

    (Refer to "FRONT SEAT ASSEMBLY ")

  3. Remove the seat track assembly.

    (Refer to "FRONT SEAT ASSEMBLY ")

    NOTE:
    • There are several DTC cases, please check below status.
      Case A B1763 OCS ECU Defect
      Case B B1323 OCS Sensor Defect
      Case C B1319 OCS Required Weight Check
      Case D B1697 ACU Communication error
    • Case A. B. Remove the seat track assembly of the front passenger seat. After replacing, perform WCS reset and DTC clear.
    • Case C. Perform WCS reset and accuracy check, if accuracy check result is accepted and DTC is historic, WCS can be re-used.
    • Case D. Check wirings and connectors. If there is no DTC after WCS reset and DTC clear, WCS can be re-used.
scientia non olet · About LEMON Manuals