System Inspection

■ Air Leakage Inspection 

1. Visually/physically inspect the following conditions:
   • Vacuum hoses for splits, kinks and improper connections.
   • Exhaust system between HO2S and Three way catalyst for air leakage.
   • EVAP system for leakage
   • PCV hose for proper installation
2. Was a problem found in any of the above areas?

   YES 

   • Repair as necessary and go to "Verification Of Vehicle Repair " procedure.

   NO 

   • Go to next step as below.

■ Visual/Physical Inspection 

1. Visually/physically inspect the following conditions:
   • Ensure that the HO2S is securely installed.
   • Check for corrosion on terminals
   • Check for terminal tension (at the HO2S and at the PCM/ECM)
   • Check for damaged wiring
   • Check the HO2S ground circuit for a good connection
2. Was a problem found in any of the above areas?

   YES 

   • Repair as necessary and go to "Verification Of Vehicle Repair " procedure.

   NO 

   • Go to next step as below.