Power Window Main Switch Inspection

Disconnect the negative (-) battery terminal.
Remove the front door trim panel.
(Refer to FRONT DOOR .)
Disconnect the connector from the switch.

Fig 1: Disconnecting Connector From Power Window Main Switch
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

Fig 2: Power Window Main Switch Continuity Reference Chart
Courtesy of KIA MOTORS AMERICA, INC.

[Auto Down]

Fig 3: Power Window Main Switch Continuity Reference Chart (Auto Down)
Courtesy of KIA MOTORS AMERICA, INC.

[Safety Up/Down]

Fig 4: Power Window Main Switch Continuity Reference Chart (Safety Up/Down)
Courtesy of KIA MOTORS AMERICA, INC.