LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Rio EX, 4D Hatchback >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels/Wheel Alignment >> Wheel >> Repair Procedures >> Run Out Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Run Out Inspection

  1. Jack up the vehicle.
  2. Measure the wheel Run-out by using a dial indicator as illustration below.
    Run-out Aluminum Steel
    Radial mm (in.) Below 0.3 (0.012) Below 1.4 (0.055)
    Lateral mm (in.) Below 0.3 (0.012) Below 0.9 (0.035)
  3. If measured value exceeds the standard value, replace the wheel.
Fig 1: Measuring Wheel Run-Out Using Dial Indicator
G11845733Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals