Repair Procedures: Adjustment

In neutral position, disjoin select cable (A) from shift lever assembly pin (B).

Fig 1: Removing Select Cable From Shift Lever Assembly Pin
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect select adjuster (A) to an arrow.

Fig 2: Disconnecting Select Adjuster
Courtesy of KIA MOTORS AMERICA, INC.
Shift to the 3th gear position.
Adjustment adjuster (B) on select cable (A) as rolling from side to side.

Fig 3: Adjusting Adjuster On Select Cable
Courtesy of KIA MOTORS AMERICA, INC.
Insert on free load and press the adjuster.
After shifting 2nd gear, checking the left select gap about 1 mm (if not, loop no, 1-5)
NOTE: If there are still gate blocking in spite of re-adjustment, shift lever assembly stopper stoke must be checked.
In neutral position, join by clip (A).

Fig 4: Locating Clip

Courtesy of KIA MOTORS AMERICA, INC.