Repair Procedures: Removal

Information 

• After disconnecting then reconnecting the battery negative cable, reset some parts that require the reset procedures.

  (Refer to Body Electrical System - "GENERAL INFORMATION ")

Battery 

1. Turn ignition switch OFF.
2. Remove the air duct (A).
   Fig 1: Removing Air Duct

   Courtesy of KIA MOTORS AMERICA, INC.
3. Disconnect the battery negative (-) terminal (A).

   Battery Negative (-) Terminal Tightening Nut: 

   4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)

   Fig 2: Disconnecting Battery Negative Terminal

   Courtesy of KIA MOTORS AMERICA, INC.
4. Disconnect the battery positive (+) terminal (A).

   Battery Negative (-) Terminal Tightening Nut: 

   7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.2 ~ 8.7 lb-ft)

   Fig 3: Disconnecting Battery Positive Terminal

   Courtesy of KIA MOTORS AMERICA, INC.
5. Remove the insulation pad.
6. Remove the battery mounting bracket (B) after loosening the mounting bolt (A).
   Fig 4: Remove Battery Mounting Bracket Mounting Bolt

   Courtesy of KIA MOTORS AMERICA, INC.
7. Remove the battery.

Battery Tray 

1. Remove the battery tray.

   (Refer to Engine Electrical System - "BATTERY ")

2. Remove the air cleaner mounting bolts (A).

   Air Cleaner Mounting Bolt: 

   7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.2 ~ 8.7 lb-ft)

   Fig 5: Removing Air Cleaner Mounting Bolts

   Courtesy of KIA MOTORS AMERICA, INC.
3. Remove the battery tray (A) after loosening the mounting bolts

   Battery Tray Mounting Bolt: 

   8.8 ~13.7 N.m (0.9 ~1.4 kgf.m, 6.5 ~10.1 lb-ft)

   Fig 6: Removing Battery Tray Mounting Bolts

   Courtesy of KIA MOTORS AMERICA, INC.