LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Body Control Module (BCM)) >> Body Control Module (BCM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel after loosening the mounting screws.

    (Proceed to Body - "CRASH PAD LOWER PANEL ")

  3. Disconnect the connector (A) from smart key unit, BCM and tilt & telescopic unit.
    Fig 1: Locating Smart Key Unit Connector
    G11801523Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the stop lamp switch of brake pedal.

    (Proceed to Brake System - "BRAKE PEDAL ")

  5. Remove the front smart junction box.

    (Proceed to Fuse And Relays - "RELAY BOX (PASSENGER COMPARTMENT) ")

  6. Remove the smart key (A) and BCM unit (B) after loosening bolt and nuts.
    Fig 2: Locating Smart Key And BCM Unit
    G11801524Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Locating Smart Key And BCM Unit Mounting Bolt
    G11801525Courtesy of KIA MOTORS AMERICA, INC.
    Fig 4: Loosening Smart Key And BCM Unit Mounting Bolts And Nuts
    G11801526Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals