DTC B1004-55: CUbis Present Error - Coding Code Error: General Description: General Description
WARNING: This page is about a different car, the 2016 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
Cluster memorizes what control modules are installed on the vehicle through the CAN-BUS. Vehicle optional information is memorized in cluster by EOL coding procedure in the End Of Line.
DTC will set if the optional information is different when compared between memorized optional information from CAN-BUS and optional information sent by EOL.
In the assembly line, EOL communication will be finished in case that DTC is not set during DTC searching.
In service field, it is necessary to set cluster by using variant coding procedure with GDS in order to syncronize the optional parts on the vehicle after replacing cluster.