Repair Procedures: Replacement

Remove the front driveshaft.
(Refer to "FRONT DRIVESHAFT .")
Remove the TJ joint assembly.
(Refer to "TJ JOINT .")
Remove the Dynamic damper.
(Refer to "DYNAMIC DAMPER .")
Using a plier or flat-tipped (-) screwdriver, remove the BJ boot bands (A).

Courtesy of
Remove the BJ boot.
Install in the reverse order of removal.
CAUTION:
- Do not disassemble the BJ assembly.
- Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.
- The boot band should be replaced with a new one.
Check the front alignment.
(Refer to "TIRES/WHEELS/WHEEL ALIGNMENT .")