Repair Procedures: Installation
- Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
- Install the dynamic damper.
- Install the dynamic damper band (A).
- Using the SST (09495-3K000), secure the TJ boot bands (B).
Clearance (A ):2.0 mm (0.0787 in.) or less
- Install the TJ joint assembly.
(Refer to "TJ JOINT .")
- Install the front driveshaft.
(Refer to "FRONT DRIVESHAFT .")
- Check the front alignment.
(Refer to "TIRES/WHEELS/WHEEL ALIGNMENT .")