Repair procedures: Replacement

Remove the engine room under cover.
(Refer to "ENGINE ROOM UNDER COVER ")
Drain the manual transaxle oil after loosening the oil drain plug (A).

Fig 1: Locating Oil Drain Plug
Courtesy of KIA MOTORS AMERICA, INC.
After draining the all of oil, install the drain plug with new gasket.
Tightening torque:

58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.9 lb-ft)
Loosen the oil filler plug (A).

Fig 2: Locating Oil Filler Plug
Courtesy of KIA MOTORS AMERICA, INC.
Add new oil through the filler plug hole.
Specified oil : SAE 75W/85, API GL-4

Oil capacity

Gasoline 1.6: 1.8 ~ 1.9 L (0.46 ~ 0.50 U.S.gal., 1.90 ~ 2.01 U.S.qt., 1.58 ~ 1.67 Imp qt.)

Gasoline 2.0: 1.9 ~ 2.0 L (0.50 ~ 0.53 U.S.gal., 2.01 ~ 2.11 U.S.qt., 1.67 ~ 1.76 Imp qt.)

NOTE: The oil level should be consistent with the oil filler hole.
Install the oil filler plug with new gasket.
Tightening torque:

58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.9 lb-ft)
Install the engine room under cover.
(Refer to "ENGINE ROOM UNDER COVER ")