LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules & Clock Spring >> Driver Airbag (DAB) Module And Clock Spring >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Set the front tires straight-ahead before removing the steering wheel.
    CAUTION: If the steering wheel and the front tires are not set straight ahead together, it affects the number of circulation of steering wheel and the cable inside the clock spring is possible to be damaged.
  2. Disconnect the battery negative cable.
    NOTE: After disconnecting the battery negative cable, wait for at least 30 seconds.
  3. Release the connector locking pin, then disconnect the driver airbag module connector (B).
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover facing up.
  4. Remove the steering wheel.

    (Refer to "STEERING COLUMN AND SHAFT .")

  5. Loosen the screws and then remove the steering wheel column shroud (A).
    G11953737Courtesy of
  6. Disconnect the clock spring and horn connector (A) and then remove the clock spring.
    G11953738Courtesy of
scientia non olet · About LEMON Manuals