| DTC Strategy |
|
- Poor Connector Connection
- Signal circuit open
- Signal circuit short to battery
- Ground circuit open
- TPS
- ECM
|
| Case 1 |
Enable Condition |
|
| Threshold Value |
- TPS1 voltage is higher than 4.9V
- TPS1 signal is short to power/open
|
| Case 2 |
Enable Condition |
- Ignition "ON"
- Engine idle
- TPS target value is less than 21.8%
- Proportion error between TPS1 and TPS2 or faulty of TPS2
|
| Threshold Value |
- TPS1 voltage is higher than 3.0V during engine idle
- TPS1 signal is short to power/open
|
| Diagnosis Time |
|
| MIL On Condition |
|