Blind Spot Detection DTCS
WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
BLIND SPOT DETECTION DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| <DTC C1101 | 17: Battery Voltage High |
| <DTC C1102 | 16: Battery Voltage Low |
| <DTC C120A | 11: LED Right Circuit Short to Ground |
| <DTC C120B | 12: LED Right Circuit Short to Battery or Open |
| <DTC C120B | 15: LED Right Circuit Short to Battery or Open |
| <DTC C120C | 11: LED Left Circuit Short to Ground |
| <DTC C120D | 12: LED Left Circuit Short to Battery or Open |
| <DTC C120D | 15: LED Left Circuit Short to Battery or Open |
| <DTC C1283 | 81: Lateral G Sensor/Longitudinal G Sensor/Yaw Rate Sensor - Signal Error |
| <DTC C1501 | 01: Switch Failure |
| <DTC C150A | 14: Switch Circuit Failure |
| <DTC C160A | 88: Local CAN Bus Off |
| <DTC C1611 | 87: CAN Time-out EMS |
| <DTC C1612 | 87: CAN Time-out TCU |
| <DTC C1613 | 81: CAN Signal Error EMS |
| <DTC C1616 | 88: C-CAN Bus OFF |
| <DTC C1625 | 87: CAN Time-out ABS/ESC (ESP) |
| <DTC C1628 | 87: CAN Time-out Cluster |
| <DTC C1633 | 81: Cluster Invalid Displayed Speed |
| <DTC C1642 | 81: CAN Message Failure - Brake |
| <DTC C1646 | 81: CAN Message Failure - TCU |
| <DTC C170A | 11: Activation Switch LED Circuit short to ground |
| <DTC C170B | 12: Activation Switch LED Circuit short to battery or open |
| <DTC C170C | 04: ECU Hardware error (Master) |
| <DTC C170D | 04: ECU Hardware error (Slave) |
| <DTC C1743 | 05: Software Mis-Match |
| <DTC C1816 | 87: CAN time-out SJB |
| <DTC C1817 | 87: CAN Signal Error Gateway |
| <DTC C2702 | 54: Control Module Missing Calibration |
| <DTC C2703 | 54: Control Module Slave Missing Calibration |