LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2017 >> Forte LX, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Electronic Stability Program (Esp) System) >> Front Wheel Speed Sensor >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
    NOTE: In order to protect the wheel speed sensor, when measuring output voltage, a 100 Ω resister must be used as shown.
    Fig 1: Checking Output Voltage Between Terminal Of Wheel Speed Sensor And Body Ground
    G12329916Courtesy of KIA MOTORS AMERICA, INC.
  2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as displayed below.
Fig 2: Checking Change Of Output Voltage Of Wheel Speed Sensor To Normal Change
G12329917Courtesy of KIA MOTORS AMERICA, INC.

V_low: 0.59V - 0.84V

V_high: 1.18V - 1.68V

Frequency range: 1 - 2, 500Hz

scientia non olet · About LEMON Manuals