Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don't do any repair work right after engine stops.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Release the residual pressure in fuel line (Refer to the RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
Remove the delivery pipe & injector assembly (Refer to "DELIVERY PIPE ").
Remove the connector (A) and the fixing clip (B), and then separate the injector from the delivery pipe.

Fig 1: Removing Connector And Fixing Clip

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Separating Injector From Delivery Pipe

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Combustion Seal, Rubber Washer, Support Disc And O-Ring

Courtesy of KIA MOTORS AMERICA, INC.