Passenger Power Window Switch Inspection

Disconnect the Negative (-) Battery Terminal.
Remove the Front Door Trim Panel.
(Refer to "FRONT DOOR TRIM REPLACEMENT ")
Disconnect the connector from the switch.

Fig 1: Passenger Power Window Switch Connector Terminals
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

Fig 2: Passenger Power Window Switch Terminal Continuity Chart (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Passenger Power Window Switch Terminal Continuity Chart (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.