Repair Procedures: Replacement

WARNING: This page is about a different variant/trim than selected.

Disconnect the back up lamp switch connector (A).

Fig 1: Disconnecting Back-Up Lamp Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the back up lamp switch (A).

Fig 2: Removing Back-Up Lamp Switch
Courtesy of KIA MOTORS AMERICA, INC.
Replace a new one and install the back up lamp switch.
Tightening Torque:

29.4-34.3 N.m (3.0-3.5 kgf.m, 21.7-25.3 lb-ft)