Repair Procedures: Installation

[LH] 

1. Install the STG spindle assembly.

   Tightening torque: 

   6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

2. Connect the STG spindle connector.
3. Install the tail gate pillar trim [LH].
4. Connect the negative (-) battery terminal.

[RH]

1. Install the STG spindle assembly.

   Tightening torque: 

   6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

2. Connect the STG spindle connector.
3. Install the rear A/C duct.
4. Install the third row seat belt upper anchor.

   Tightening torque: 

   39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

5. Install the luggage side trim [RH].
6. Install the tail gate pillar trim [RH].
7. Connect the negative (-) battery terminal (+).