Repair Procedures: Removal

Open the fuel filler door and then remove the filler-neck mounting bolts (A).
Filler-neck assembly mounting bolt:

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Fig 1: Locating Filler-Neck Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Left the vehicle.
Remove the rear-LH wheel, tire, and the inner wheel house (A).

Fig 2: Locating Inner Wheel House
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel filler hose (A).
Disconnect the ventilation hose quick-connector (B).

Fig 3: Locating Fuel Filler Hose & Ventilation Hose Quick-Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the filler-neck assembly from the vehicle after removing the bracket mounting nut (A).

Fig 4: Locating Bracket Mounting Nut
Courtesy of KIA MOTORS AMERICA, INC.